Cobblestones create a textured “cobbled” surface when fired. Apply over another glaze and during the firing process, a shattered pattern of raised, irregular chips will emerge. The underlying glaze will appear in the cracks. To create colored Cobblestones, brush Stroke & Coat® glaze of choice over the white Cobblestone and fire.
To achieve the cracked pattern:
Apply Cobblestones over any non-toxic glaze. While Cobblestones can be applied over a previously fired glaze the cracked pattern will become more pronounced if applied on an unfired glaze.
Shake for 5-6 seconds before use.
Dispense glaze onto a palette (tile, plate, etc.) and apply 2 coats with a broad, soft brush.
Apply the second coat while the first coat is still damp: do not allow Cobblestone to dry between coats.
Pattern break-up is determined by the application direction of the brush stroke. Large break up heavier application, small breakup lighter application.
If application is too light the cobblestone will not break up. Reapplying and touching up will not achieve a break up.
Fire to shelf cone 06 or higher.
Cone: 06 or higher | Food Safe* | Non-Toxic | Sold in 4oz and Pint jar only
|↑ Back To Top|